Report Builder 5.1 SP2 crashes on open qrp Files

Discussion forum about all things Report Builder (all versions).
EWetzel
Germany
Posts: 271
Joined: 07 Mar 2017, 12:08
Location: Germany

Report Builder 5.1 SP2 crashes on open qrp Files

Post by EWetzel » 06 May 2008, 18:33

When you have installed Autocad 2006 and open a qrp File with Report Builder 5.1 SP2 the Report Builder crashes.
It is different from the Default Printer setting but with a lot of printer drivers it crashes, e.g. HP Laserjet 2300 DTN.
With the HP Laserjet 5P driver it works, but this was the only one.
Without Autocad 2006 there is no problem with all my printers, also with Autocad 2006 and older versions
e.g. 2.1 and 4.1 of Report Builder there is no problem.
When Autocad 2006 is installed there are 2 dll's additional loaded with Report Builder 5.1, the "AcSignCore16.dll" and the "OLEACC.DLL".
I think there is the Problem.

best regards
Enrico

Ana Paula Bonani

Re: Report Builder 5.1 SP2 crashes on open qrp Files

Post by Ana Paula Bonani » 07 May 2008, 15:09

Enrico,

Does it crash with any QRP file that you try to open?
We don't have Autocad available to test so maybe you could send us a "Process Explorer" list showing the environment, DLLs etc when trying to open the report and we'll try to help.

Thanks,
Ana

EWetzel
Germany
Posts: 271
Joined: 07 Mar 2017, 12:08
Location: Germany

Re: Report Builder 5.1 SP2 crashes on open qrp Files

Post by EWetzel » 08 May 2008, 06:49

Hi Ana,

yes it crahses with any report also with sample reports.
The Problem is a combination of Autocad 2006 and the Default printer Driver.
I can open the Report with the HP Laserjet 5P as default but when i change the Printer
at the Printer Dialog in Report Builder to HP Laserjet 2300 DTN it crashes also.
Without Autocad 2006 everything is ok.
I have attached the process list.

Best Regards
Enrico
You do not have the required permissions to view the files attached to this post.

Ana Paula Bonani

Re: Report Builder 5.1 SP2 crashes on open qrp Files

Post by Ana Paula Bonani » 02 Jun 2008, 22:21

Hi Enrico,

Thanks for the process/DLL information. As far as RB DLL's go, all looks fine.
I'm downloading Autocad now but I couldn't find a trial version of 2006 available. The current trial version is Autocad 2009. Have you tried that by any chance?
Also, have you tried from programs other than Report Builder - MS Word for instance - to switch to the HP printer giving you problems to see if you can repro out of Report Builder?

Thanks in advance,
Ana
--
Unify Technical Support

Return to “General Discussion”

Who is online

Users browsing this forum: [Ccbot] and 0 guests